Factory-Direct · ISO 9001:2015
Walkway Fixed Ladder — Steel Walkway Ladder for Elevated Access
A permanently mounted walkway ladder that ties ground level to raised walkways, mezzanines, and crossover platforms. Welded in Q235B or SS304, built to OSHA 1910.23 and EN ISO 14122-4. Factory-direct from Dengtai, shipped to 50+ countries.
Gallery
Welded rungs
Platform tie-in
Anti-slip treads
Stand-off bracket
Overview
What Is a Walkway Fixed Ladder?
A walkway fixed ladder is a permanently bolted vertical ladder that carries people up to a raised walkway, a mezzanine, or a crossover platform. It is not a portable unit. It welds to the structure and stays put — rated, certified, and ready for daily traffic. We cut every walkway ladder to the climb height on your drawing, in Q235B carbon steel or SS304 stainless.
In our factory, we usually pre-weld the top stand-off bracket and the platform tie-in plate before the unit ships. The install crew then bolts straight to the walkway stringer — no on-site cutting, no guesswork on the landing gap. Small step, but it keeps the transition flush and the anchor pattern exact.
A food-processing plant in Southeast Asia recently ordered 40 hot-dip galvanized units for conveyor-line crossover access; the batch left with material certificates, load-test data, and third-party SGS inspection on file. We ship factory-direct to 50+ countries, with no trading house between you and the welders.
Walkway fixed ladder, hot-dip galvanized Q235B
Specifications
Specifications & Materials: Q235B, SS304 & Galvanized Steel
SS304 Stainless
Material certificate per batch — ISO 9001:2015
Standard Dimensions
These are the defaults we run unless a project drawing says otherwise. Every walkway ladder is cut to the measured climb height.
| Parameter | Value |
|---|---|
| Material | Q235B carbon steel (HDG) or SS304 / SS316 stainless |
| Rung spacing | 250 mm (OSHA 1910.23 / EN ISO 14122-4) |
| Clear climbing width | 400–600 mm |
| Rung / tread | 20 mm round bar or serrated anti-slip flat bar |
| Wall / stand-off clearance | 150–200 mm |
| Min. rung load | 1.5 kN single concentrated load (EN ISO 14122-4) |
| HDG coating thickness | 70–85 µm |
| Top transition | Bolted tie-in plate to the raised ladder walkway or platform edge |
| Fall protection | Guardrail, safety cage, or vertical rail / lifeline per OSHA 1910.28 |
| Finish options | Hot-dip galvanized, powder coat, or stainless |
| Max height | Cut to site; rest platforms per standard |
Compliance
Standards & Compliance: OSHA 1910.23, 1910.28 & EN ISO 14122-4
In-House Load Testing
Sample tension test, every batch — ISO 9001:2015
OSHA 1910.23 & 1910.28 Compliant
Rung spacing, clearances, and fall-protection triggers built to the US fixed-ladder and walking-working-surfaces rules. Above 24 ft (7.3 m) we fit a ladder safety system or cage.
EN ISO 14122-2 & 14122-4 Build
Walkway tie-in and ladder geometry follow the European standard for permanent means of access to machinery — part 2 for walkways and platforms, part 4 for fixed ladders.
Certified Materials
Q235B, SS304, or SS316 supplied with material certificates and weld-inspection reports for every batch. Each steel walkway ladder ships with its own paperwork.
Load-Tested In House
Each production batch is sample tension-tested; third-party inspection by SGS, TÜV, or Bureau Veritas on request. Built under ISO 9001:2015.
Configurations & Installation
Configurations & Installation
1. Site Survey & Layout
Confirm the walkway edge, climb height, and top-landing position before fabrication.
2. Mount Stand-Off & Tie-In
Fix stand-off brackets with chemical or expansion anchors; bolt the tie-in plate to the walkway stringer at 150 mm wall clearance.
3. Assemble Ladder Flights
Bolt sections, align rungs at 250 mm spacing, and level the stile against the platform edge.
4. Fit Guardrail & Anti-Slip Treads
Add a self-closing gate or guardrail at the landing, serrated anti-slip treads, and a cage or rail where OSHA 1910.28 requires it.
5. Inspect & Hand Over
Load-check, weld and anchor inspection, then hand over material certificates and load-test data.
Applications
Where Walkway Fixed Ladders Are Used
Fixed Ladder (Pillar Guide)
The full guide to fixed steel ladders — types, standards, materials, and where each fits.
Warehouse Fixed Ladder
Fixed access ladder for racking, mezzanines, and warehouse walkway runs.
Vertical Fixed Access Ladder
Straight vertical ladder for tall plant and tank access, with cage or rail options.
Fixed Ladder Safety System
Vertical rail and lifeline fall-arrest system for ladders over the OSHA height trigger.
FAQ
Frequently Asked Questions
Factory-Direct Pricing & Documentation
Tell us the climb height, material, and the walkway or platform you are tying into. As the factory, we quote direct — material certificates, weld reports, and load-test data included, and we welcome third-party factory audits.